Vitek VT-H41 Podręcznik Użytkownika Pobierz pdf (Strona 5)

VT-H41



System components and Installation

Requirements for installation and safety

This chapter is for the requirements for safe installation and use.

This kit should be installed on a flat table or in a rack.

The location in which the DVR is installed in the room is very important for proper operation of the system.

When the DVR is installed too closely together or the location is poorly ventilated, the DVR may not operate

properly and maintenance of the DVR may be difficult. Make sure that the air should be sufficiently circulated

within the system operating room and the cover of the main system must be tightly fastened to prevent

malfunction.

There are high voltage parts inside. Do not open the cover during operation.

The DVR must be installed in a place that meets the following environmental conditions.

• Operating temperature: 5°C ~ 40°C (41°F ~ 104°F)

• Operating humidity: 30% ~ 90% RH

• Input voltage: DC +12V 5A

• Power usage: About 25Watts

• Frequency: 60Hz/50Hz

Main replacement parts

• Hard disk (When HDD is factory-installed.): 1 year (25°C/77f environment)

• Cooling fan: 1 year (25°C/77f environment)

• Battery: 2 years (25°C/77f environment)

CAUTION

During the operation of this product, the fluctuation of input voltage must be within 10% of the

rated voltage and the external power outlet must be grounded, otherwise, it may cause electric

shock or malfunction of the product.

Do not connect heat-generating appliances to the same power outlet in which the product is

plugged, otherwise it may cause a fire or malfunction of the product.

The use of an Automatic Voltage Regulator (AVR) is highly recommended to ensure that stable

power is supplied.

CAUTION

The HDD that is installed in DVR can be replaced or upgraded by and authorized VITEK Repair

Center. Warranty will be void if unit is opened by unauthorized personnel.



1 2 3 4 5 6 7 8 9 10 ... 75 76

Brak uwag

Vitek VT-H41 Podręcznik Użytkownika Strona 5