Vitek VT-H41 Podręcznik Użytkownika Pobierz pdf (Strona 44)

VT-H41



ON: The channel is included in sequencing channels.

OFF: The channel is NOT included in sequence list.

BRIGHTNESS – Set the brightness of the channel using  buttons.

Setting values of the display bar: 0% ~ 100% (The most brightness)

CONTRAST – Set the contrast of the channel using  buttons.

Setting values of the display bar: 0% ~ 100% (The most contrast)

HUE – Set the hue of the channel using  buttons.

Setting values of the display bar: 0% ~ 100%

SATURATION – Set the saturation of the channel using  buttons.

Setting values of the display bar: 0% ~ 100%

6-2. RECORD

Menu item Description

RESOLUTION Set resolution to either

704x480(NTSC)/704X576(PAL) or 352x240(NTSC)/352X288(PAL).

CHANNEL Select the channel for applying the following settings.

FRAME RATE

Set the frame rate for the specified channel.

The sum of the frame rate values from each channel cannot exceed

maximum frame rates for a particular recording resolution.

The maximum frame rate: 120/100fps - 352x240(NTSC)/352X288(PAL)

30/25 fps - 704x480(NTSC)/704X576(PAL)

QUALITY Select the recording quality for the specified channel from

NETWORK, ECONOMY, NORMAL, HIGH, FINE.

RECORDING BY Assign the recording mode for each channel. Recording modes:

CONTINOUS, MOTION, SENSOR, SCHEDULE, and NONE.

PRE RECORD Enable/disable pre-event recording. Pre-event recording time is 5

sec and only intra-frames are recorded for pre-event recording.

POST RECORD Set post event recording time duration for the specified channel

AUDIO Enable/disable audio for the specified channel

SCHEDULE Set recording schedule.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Brak uwag

Vitek VT-H41 Podręcznik Użytkownika Strona 44