Vitek VT-E4 Instrukcja Użytkownika Pobierz pdf (Strona 14)

CONNECT & POWER ON

• Connect up to 4/8/16 CAMERA INPUTS as necessary.

• Connect one or more monitors to the DVR using the COMPOSITE, VGA connections

• Connect power to the DVR. The DVR checks for proper power connection and emits two beeps.

Press the POWER BUTTON on the front panel of the DVR to begin operation.

The DVR startup screen detects and checks the status

of hard drives. If this is your first time booting up, it

may ask you to format your drive, please select yes

and do so.

After startup diagnostics are complete, the operator must

logon to the system. The default user name is ‘ADMIN’.

Using the Remote Controller , input the default password

of ‘1234’ and press the ENTER button.

The DVR begins normal operation and shows the

default display of all 4/8/16 channels.

The status bar at the bottom of the screen shows

current time and date and percentage of hard drive used.

A title for each channel is shown

The red square and letter ‘T’ in the top right of each

channel display shows that the channel is recording in

Timer / Schedule mode.

Double click on the Password tab then the Virtual

Keyboard will be displayed. Then click the password and

click the button.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 82 83

Brak uwag

Vitek VT-E4 Instrukcja Użytkownika Strona 14