Vitek VT-3496 Podręcznik Użytkownika Pobierz pdf (Strona 6)

VT-HDOC Series

Prepair USB dirve (format in fat32) and create folder with the name “dvr” download updated

firmware from

http://vitekcctv.com/Downloads.asp into “dvr” folder

Cycle the DVR’s power (turn DVR Off then On and boot up)

Plug the prepared USB thumb drive in the USB port of DVR. Only the upper USB port in

the Front panel of DVR is allowed to update the F/W.

Enter the DVR menu and select “SYSTEM” then “MANAGEMENT”

Select “F/W UPGRADE” and the following image will display

Press and enter ‘Upgrade’.

The updating process can take from 1 to 10 minutes.

Don’t remove the USB thumb drive during update.

Don’t’ turn the DVR off during update.

When the update is completed the DVR will reboot

Remove the USB thumb drive from the DVR.

If the firmware upgrade is finished, system will start auto re-booting.

1.1.2 UPDATING FROM THE WEB MENU

Using the web GUI to update the system F/W remotely:

For more information on how to access the web GUI, refer to section 7.1, ‘WEB SERVER’ of this user’s guide.

Go to ‘SYSTEM’ then ‘SYSTEM MANAGEMENT’. Refer to the below picture.

1 2 3 4 5 6 7 8 9 10 11 ... 95 96

Brak uwag

Vitek VT-3496 Podręcznik Użytkownika Strona 6